Skunk Works

	Excess Inventory Reduction Sale Only 1 item left!
	CDR motor Kit assembly instructions
	New Skunkworks page added

Westport Design Skunk Works

Custom developed solutions

Martin Hunters ANT 20

7 Screaming DizzBusters (well 8 really)

	126" span ANT 20 built by Martin Hunter
	Martins goal was to spin 8 10" props on 7.4 volts with 10 OZ of thrust from each propeller for over 80 0z of thrust! Also to keep the weight off!
	Westport Design's solution: 8 customized Westport Design CDR motors featuring Go Brushless can, stator, long shaft, 5x5x1 M50 magnets, 25Turns of 25G wire, dual 6x3x2 high speed ball bearings set in a Carbon fiber tube, and IPS stick mounting adaptors. Motor design dubbed "Christine" in honor of Martins Wife
	Awesome Build Thread Here: Build Thread Many more pictures
	Motor run up video: Video
	Maiden Flight Video: Video

Dual motors on one ESC

It works!

Check www.m-a-e.com for more info

Darth Trix

What happens when you leave Darth Smaul and Dominatrix in the closet over the winter?

You get a Little Evil!

12 gram out-runner development

Based on Go Brushless 20mm Components we have developed a 12 gram motor with 5 3/8 oz of thrust using a 5x5 prop and 2S LiPo. The blue motor is a 22.7mm based motor and it weighs 18 to 20 Grams depending on configuration. This is the motor for Darth Trix

Screaming NANO Pig

Twin EDF Freedom Fighter!

Note Suction Cup Cannon

Send mail to jskrebs@westportdesign.com with questions or comments about this web site. Copyright © 2003 Westport Design Last modified: 04/15/06

Send mail to jskrebs@westportdesign.com with questions or comments about this web site.
Copyright © 2003 Westport Design
Last modified: 04/15/06